![]() Therefore it's not the most simple solution. Note that this requires access to DNS hosting on the public Internet as well as the ability to configure DNS records on your local network. Configure your phone to connect to this DNS name. Point the identical record that's resolvable on your private LAN to your camera system. Point the publicly-resolvable record to your router's WAN IP address. Create identical DNS records inside and outside your network, such as. Use a DNS record that returns your router's WAN IP when outside your LAN and the camera system's IP when you're inside the LAN. Your assumption that onvif is a standard that is 100 percent cross compatible is incorrect.Most of the time, you can cross use hikvision and dahua, but all it takes is a firmware update and you are screwed.then there is the issue of motion detection, even if the cameras work they may not properly pass the motion detection event to the NVR.Hairpin NAT tells your router to apply the port forward rules to requests sent to its WAN IP address even when the request originates on the LAN interface. Category: How To microseven IP Camera - Professional Security Cameras - Connect To The World. After you set it up, then the camera opens normal. Configure your router for hairpin NAT if it supports this feature. You can go to Control Panel -> Internet Options -> Security and select ‘Trusted sites’.(This is what you've indicated you'd rather not do.) Connect to the local IP address of the camera system.The reason you can't connect is because your phone is trying to connect to your router's public IP address, but since the request isn't coming from the Internet, your router is refusing the connection.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |